2½" Faceplate for Viper Wet End

Waterway Viper Pump Faceplate with 2.5" Suction Inlet Waterway part #311-1510 Made in the USA by Waterway Plastics Actual measurement of the intake is approximately 3-5/8" across the outside of the threads. Faceplate does not include drain plug, barb fittings, or o-rings. Drain plugs with o-rings are sold separately if required. Some pumps may have a small hose instead of the drain plug which would require an additional barb fitting Faceplate o-ring is sold separately, available here NOTE: This faceplate only fits Waterway Viper pumps. It is not compatible with Waterway Executive 48, Executive 56, Aqua-flo or any other brands of pumps.